Unipulse UPM100, Operation Manual

Page: 38 / 89

29
4 UTM Ⅱ Capacity Setting
29
Chapter
4
◇
How to set the rotation stop mode
1.
Select UTM
Ⅱ
capacity setting mode.
2.
Set the "(1) UTM Ⅱ capacity setting target selection".
* Performed only when two UTM Ⅱ are connected.
3.
Perform "(2) Zero calibration".
4.
Perform procedure "(3) UTM Ⅱ capacity setting".
5.
Set the "(4) Rated output value setting".
* This setting can be configured only when "----" is selected in "(3) UTM
Ⅱ
capacity
setting".
6.
Set the "(5) Rated capacity value setting".
* This setting can be configured only when "----" is selected in "(3) UTM
Ⅱ
capacity
setting".
7.
Set the "(6) Pulse rate".
* This setting can be configured only when "----" is selected in "(3) UTM
Ⅱ
capacity
setting".
8.
Set the "(7) Absolute value mode".
9.
Set the "(8) Minimum input rotation speed".
10.
Set the "Rotation stop mode".
Press the keys to select
rotation stop mode (initial value: OFF).
Press the key to confirm and return
to the indicated value display.
* Press the key to cancel the setting and return to indicated value display.
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
%
PF
V
A
°C
rpm
V
°C
Nm
1
3 2
Σ
1
3 2
Σ
1
3 2
Σ
1
AUX
2 Σ
ALARM
REC FNC
USB RMS
MEAN
△
▽
ENT
ESC