5
1
Outline
5
Chapter
1
Setting keys
These keys are for specifying various settings and operations.
:
Select the unit to be indicated on the upper display.
Press the
+
keys and configure the settings of the UTM
Ⅱ
to connect.
:
Select the unit to be indicated on the middle display.
Press the
+
keys and configure the settings related to initial
connection.
Indicated as SYS on the lower display.
:
Select the unit to be indicated on lower display.
Press the
+
keys and configure the setting for recording.
Indicated as MEM on the lower display.
:
Select the unit to be indicated on sub display section.
Press the
+
keys to configure setting for D/A output.
Indicated as VOL on lower display.
:
Favorite display items
When normal screen is displayed, display items of three previous records starting
from the last record are alternately displayed.
Used to add a minus sign when the setting screen is displayed.
Press the
+
key to save the current display item, which can be reopened
with a single push even if a different display item is shown. Limited to three records.
When recording a 4th data, the oldest data is deleted and the new data is saved.
:
Data recording
Current value is saved on the main unit. The REC lamp is reversed for 0.5 seconds at
this time.
Press the
+
keys and write the recorded data to the USB memory.
Select save point data and save alarm record data.
Press the
keys and select "ESC" "Pt-dt" "AL-dt".
* Pt-dt: Point data
AL-dt: Alarm record data
"dt" is not displayed when there is no data.
"nodAtA" is displayed when there is no recorded data.
/
:
Changes setting value when setting screen is displayed.
/
:
Moves cursor when setting screen is displayed.
:
Function key.
:
Cancels data input when setting screen is displayed.
cal
FUNC
cal
SYSTEM
FUNC
SYSTEM
MEM
FUNC
MEM
VOL
OUT
FUNC
VOL
OUT
☆
/
－
FUNC
☆
/
－
REC
USB
FUNC
REC
USB
△
▽
△
▽
▽
▽
FUNC
ESC
