51
10
Appendices
51
Appendices
Chapter
10
10-1.
List of error displays
Torque
10-2.
Memory check/initialize
Memory check (MEM. CHECK)
Memory check examines the internal memory of the main unit automatically and detects errors.
1.
Press the
key on the main screen and enter
the setting value display screen.
2.
Display the "SYSTEM" screen using the
keys.
3.
Select memory check (MEM. CHECK) using the
keys.
The arrow (
→
) moves to the left of selected item.
4.
Memory check is performed when the
key is
pressed.
It takes a few seconds.
5.
The result will be displayed.
-LOAD
Signal input range
Over by -5V
The input electric signal substantially exceeds the signal
input range. This occurs also when an excessive load is
applied to the sensor or when the input terminal becomes
open circuit due to cable disconnection and so forth.
+LOAD
Signal input range
Over by +5V
OFL1
When below -9999
This occurs when a load greater than the assumed load is
applied to the sensor or when calibrating below the
measurement range. Check calibration, items to be measured
and so on.
OFL2
When over 9999
ZERO
Zero calibration range over
The signal input range is substantially exceeded when zero
calibration is performed. Check to see that there is no
excessive load applied to the sensor or disconnection.
10
Appendices
SET
▼
▲
▲
▼
SET
