23
5
Function Setting Procedures
23
Funct
ion Setti
ng Procedures
Chapter
5
5-4.
One-touch zero
This is a function to set the indicated value to zero with a single touch of key operation.
Operation procedure of one-touch zero
When not using the rotary encoder
1.
Press the
key.
2.
The current load is reset to zero if the
key is pressed.
The operation stops if the
key is pressed.
When using the rotary encoder
1.
The torque display starts flashing if the
key is pressed.
2.
The angle display starts flashing if the
key is pressed once more.
3.
The flashing sensor input is set to zero if the
key is pressed while the display to
reset is flashing.
The operation stops if the
key is pressed.
5-5.
ID setting (ID)
Sets the device ID of the TM400.
Separate ID can be assigned to each device.
<Setting range>
0 to 9999
ZERO
SET
ESC
ZERO
ZERO
SET
ESC
