4.Methods of Connection
20
4. Methods of Connection
4-1. Connection to the Cage Clamp Type Terminal Block
Connect to the cage clamp type terminal block by using the attached mini-screwdriver.
1. Peel the sheath of the wire to be connected 5 ~ 6mm, and twist the end to such an
extent so that it will not become loose.
2. Insert the screwdriver firmly into the hole on the right-hand side while pushing it up
slightly.
3. Insert the wire into the hole on the left-hand side so as not to loosen the end.
4. Withdraw the screwdriver.
5. Lightly pull the wire to check that it is clamped securely.
5 ~ 6mm
・
Wires connectable to the cage clamp type terminal block are
0.2 ~ 2.5mm2.
・
Do not attach crimp contacts to the ends of wires, or solder them.
・
When connecting two or more wires, twist them beforehand.
Request
