Union Community Virdi AC-2100 User Manual Download Page 60

Page: 60 / 60

AC-2100 User Guide

UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :[email protected]
http://www.unioncomm.co.kr

mode change for hours not set as office start/leave

time.

4.2.2. Fingerprint Authentication

- Change time & attendance mode by pressing the function keys.
- Enter fingerprint.

4.2.3. Authentication Using Card

- Change time & attendance mode by pressing the function keys.

- Place card.

4.3. In Case of Operating as [2.Meal Ctrl]

- Set as Menu



3.Option



1. Application setting



[2.Meal Ctrl]

- If set as meal service management, the terminal enters into a lock state

except during meal service time. Therefore, at least one meal service time

must be entered.

- Display Screen

07/08/25 PM 4:58

In case it is not meal service time (Authentication
attempt not allowed)

2009/08/25 16:58

Default screen during meal service time

2009/08/25 16:58

In case of authentication success

2009/08/25 16:58

If setting does not allow duplicated

authentication, duplicated authentication trial

error is displayed for the authentication attempt
after a successful authentication

- In case of fingerprint authentication

Authentication is done by entering a fingerprint.

- In case of card authentication

Authentication is done by placing a card.

- In case of attempting authentication without pressing the menu selection key,

authentication is done automatically with [Menu 1].

Summary of Contents for Virdi AC-2100




























































Search results

Summary of Contents for Virdi AC-2100

Reviews:

Brands by name

Popular brands

Union Community Virdi AC-2100, User Manual

Search results

Summary of Contents for Virdi AC-2100

Reviews:

Brands by name

Popular brands