AC-2100 User Guide
53
2.34bit
As “Sitecode[1byte] + User ID[3bytes]” is sent, the user ID is set
using less than 7 digits.
However, if the user ID consists of 8 digits, Sitecode is ignored
and only “User ID[4bytes] is sent.
Transmission example) SiteCode:001, UID:123456
0 00000001 00000001 11100010 01000000 0
3.Custom
As a setting made through user definition, this setting can be set
only at the server. You can only check it at the terminal.
※
It has nothing to do with the use of a Wiegand type card reader. If it is set to
‘1’ or ‘2’, the following site code value is set.
<Site Code>
(0-255):00
0
Default setting: ‘000’
This option can be used when the above Wiegand out is set to ‘1’ or ‘2’. Enter a
designated value between 0~255 in a site code to send to the Wiegand port
along with a user ID.
After entering a setting value, press down [F4] button for a longer period of
time to move to the upper menu.
3.8.5. Terminal Initialization
If [5.Initialize] is selected after selecting “6.Device” at the main menu, the
following selection menu is displayed.
1. Init Config
2. Delete Log
3. Init Terminal
[ESC][
↑
][
↓
][ENT]
Select [1] to initialize setting values,
[2] to initialize authentication records,
and [3] for factory reset.
3.8.5.1. Setting Value Initialization
◆
At default screen [F3~]
[6.Device]
[5.Initialize]
[1.Init Config]
◆
<Init Config>
1.Yes
2.No
[ESC][
↑
][
↓
][ENT]
Select [1] to initialize,
and [2] to cancel.
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :[email protected]
http://www.unioncomm.co.kr
