Uninet iColor LF700 User Manual Download

Page: 18 / 82

iColor

LF700

Manual Version 3.6

Uninet

Page 18

LCD Screen

The liquid crystal display (LCD) contains one line of 16 characters. The LCD provides cutter status

information during operations and displays menu options for the configuration of the cutter.

The various menu and submenu items are always presented in a loop, which means that, when the last menu

or submenu item is displayed, pressing the appropriate key will automatically take you back to the first item

of the same menu or submenu.

A parameter or parameter value preceded with an asterisk (*) is the current selected param-

eter or parameter value. If a menu is left with a value on the LCD which is not preceded by an asterisk, then

this will not be the saved value.

Each keystroke can initiate an internal test or movement of head or media.

KEEP FINGERS AND OTHER BODY PARTS AWAY FROM THE CUTTING

AREA. THERE ARE HAZARDOUS MOVING PARTS.

WARNING

��
��

��

��

��

��

Summary of Contents for iColor LF700














































































Search results

Summary of Contents for iColor LF700

Reviews:

Related manuals for iColor LF700

Brands by name

Popular brands

Uninet iColor LF700, User Manual

Search results

Summary of Contents for iColor LF700

Reviews:

Related manuals for iColor LF700

Brands by name

Popular brands