STEP 1 of 3
Measure the label length, label width, gutter and alley.
STEP 2 of 3
Input the number into proper place. For example, the label width(X) is 50.5mm, label height(Y) is 127mm, gutter is
3.175mm, alley is 3.175mm.
STEP 3 of 3
If you want to print 1mm bleed outside of the label size on both direction, just minus gutter and alley by 2mm, and add
2mm to width and height. So width becomes 52.5mm, height becomes 129mm, gutter becomes 1.175mm and alley
becomes 1.175mm.
56
