Safety Information
Your Uninet product has been carefully designed to give you years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the product.
Warning
- Here are some of the things to look for:
•
Save all provided documentation for future reference. Ensure all warning and instruction labels on the product are
read, understood and followed in order to prevent any risk of injury.
•
This product may be heavy. Please check the weight of the product and take all necessary precautions to prevent
the risk of personal injury. Place your product on a firm, solid surface. If placed on something unsteady, it may fall
and be damaged. If placed on a soft surface, the vents may be blocked, causing the product to overheat.
•
If the product is installed on a cabinet or high capacity feeder, ensure wheel locks are applied once placed in final
position for use, to prevent risk of movement or injury.
•
Protect your product from overheating. Make sure no obstructions block the openings of the product. Do not put the
product on or near a heat source (such as a radiator or heat register). Keep the product out of direct sunlight. Allow
enough room around the product for adequate ventilation and easy access to the paper paths. If the product is
placed in any kind of enclosure, make sure the enclosure is well ventilated to prevent a fire.
•
When the product cover is open, do not touch the fuser unit or print head as you may receive burns. Allow it to cool
before touching.
•
If the product casing gets extremely hot or smoke, unusual smells or abnormal noises are emitted from the product,
there is a risk of fire. Unplug the mains connector and contact Uninet service.
•
Do not use the product near water. Do not spill liquid of any kind on it. Do not connect or disconnect the power plug
with a wet hand as this may cause electric shock. Unplug the product before you clean it. Use only a damp cloth;
do not use liquid or aerosol cleaners. Do not use an extremely flammable spray near the product as the product
contains high temperature parts that may cause a fire.
•
Be certain that your power source matches the rating listed on the back of the product. If you are not sure, check
with your dealer or local power company before connecting the product.
•
Do not connect this product to an uninterruptible power supply (UPS).
•
Your product has a grounded, three-prong plug as a safety feature. This plug only fits into a grounded outlet. If the
plug does not fit, the outlet may be an older, non-grounded type. Contact an electrician to have the outlet replaced.
Do not use an adapter to defeat the grounding.
•
Install the product near an easily accessible power outlet and avoid damaging the power cord. Do not put anything
on it or place it where it will be walked on. If the cord becomes damaged or frayed, replace it immediately.
•
If you are using an extension cord or power bar with the product, make sure the total amperes required by all the
equipment on the extension is less than the extension’s rating. The total ratings of all equipment plugged into the
outlet should not exceed 15 amperes.
•
Do not poke anything in the ventilation slots of the product. You could get an electrical shock or cause hazardous
electrical arcing, which could cause a fire.
•
The acoustic noise of this product is less than 70 dB (A) as measured in accordance with EN ISO 7779.
•
The operating condition range for your product is: 10 to 32°C and 20 to 80% RH. Operation of the product outside
this range could result in damage to the product.
•
Do not throw toner cartridges or image drum cartridges into a fire as you may receive burns from a dust explosion.
•
Ensure loose clothing and hair is kept clear of moving parts when the product is in operation to prevent possible
risk of injury.
•
Ensure both the product and mains power switches are in the OFF position before connecting the AC power cable.
•
Always hold the power plug to connect/disconnect the power cable to/from the mains socket. Unplugging by pulling
on the cable can cause fraying and may lead to fire or electric shock.
•
Use only the power cable supplied. Using a power cable not intended for this product may lead to fire or electric
shock. Do not use the power cable supplied with this product for any other electrical equipment.
•
Aside from the routine maintenance described in the documentation, do not try to service the product yourself.
Removing the cover may expose you to shocks or other hazards.
•
Do not make any adjustments other than those outlined in the documentation. You may cause damage that will
require extensive repair work. The provided documentation explains how to get your product serviced by qualified
Uninet technicians. If anything happens that indicating your product is not working properly or has been damaged,
unplug it immediately and follow the procedures in the provided documentation for having your product serviced.
6
