11.0 Models/Options
11.1 L-Shaped Base Model
The base model is essentially an L-shaped case with the stock input area open. This allows easy access to the stock input.
Using the base model, the preferred stock would be fan-fold. If the stock stack and length is small enough, it could sit
behind the Unit in the open area.
11.2 Roll Stock Model
The roll stock model allows up to an 8” (20.32cm) stock roll to be mounted in the stock input area.
FIGURE 11.1: L-Shaped Base Model
FIGURE 11.2: Roll Stock Model
ET6000 Operator’s Manual
71U-1415-100K; REV E
Page 34 of 38
