Table Of Contents
1.0
Introduction
----------------------------------------------------------------------------------------------- Page 4
2.0
Items Included -------------------------------------------------------------------------------------------- Page 4
3.0
Installation
------------------------------------------------------------------------------------------------- Page 5
3.1 Unpacking
3.2
Location and Setup
3.3
Plugging into the Unit
4.0
Host Interface Specifications
-------------------------------------------------------------------------- Page 6
4.1 Hardware
Interface
4.2 Data
Structure
5.0
ASCII Control Character List
------------------------------------------------------------------------ Page 6
6.0
Front Panel ------------------------------------------------------------------------------------------------ Page 7
6.1 Keypad/Display
Layout
6.2
Basic Operator Level Menu
6.3 Adjustments
Menu
6.4 Service
Menu
6.5
Selected Stock Type Parameters Setup Menu (Service Sub Menu)
6.6
Host Setup Menu (Service Sub Menu)
6.7
Comm Port Setup Menu (Service Sub Menu)
6.8
TCP/IP Setup Menu (Service Sub Menu)
6.9
ATB Setup Menu (Service Sub Menu)
6.10
Printer Setup Menu (Service Sub Menu)
6.11
Maintenance Menu (Service Sub Menu)
6.12
Printer Information (Service Sub Menu)
7.0
Loading Stock -------------------------------------------------------------------------------------------- Page 22
7.1
Adjusting the Input Path Size
7.2
Locking Down the Input Path
7.3
Loading Fan-Fold Stock
7.4
Loading Roll Stock
7.5
Loading Stock with the Optional Dust Cover
7.6
Clearing Stock Jams
8.0
Thermal Print Head, Platen, and Sensors
---------------------------------------------------------- Page 27
8.1
Cleaning the Thermal Print Head
8.2
Cleaning the Platen
8.3
Replacing the Thermal Print Head
8.4
Cleaning/Clearing the Present Sensor (PS)
8.5
Cleaning/Clearing the Left Top Of Form Sensor (TOF)
8.6
Cleaning/Clearing the Center Top Of Form Sensor (TOF)
9.0
Stock Cutter ----------------------------------------------------------------------------------------------- Page 31
9.1 Cutter
Location
9.2 Cutter
Operation
9.3
Clearing a Jam
ET6000 Operator’s Manual
71U-1415-100K; REV E
Page 2 of 38
