8.4 Cleaning/Clearing the Present Sensor (PS)
1. Press the front panel release button. Lift the
front panel up and out of the way.
2. Pull the print head release lever forward and lift
the print head up away from the platen.
3. Grip the stock firmly from the rear of the Unit
and remove.
4. Clean the present sensor window and the sensor
reflector plate using a dry cloth. Verify they are
clear of particles, paper stock, and dust. Use
8.5 Cleaning/Clearing the Left Top Of Form Sensor (TOF)
1. Press the front panel release button. Lift the
front panel up and out of the way.
ease lever forward and lift
the platen.
4. Clean the top of form transmitter and receiver
using a dry cloth. Verify they are clear of
particles, paper stock, and dust. Use canned air
to clear sensor.
Do not use alcohol except to clean off adhered
labels or adhesives.
canned air to clear sensor.
Do not use alcohol except to clean off adhered
labels or adhesives.
2. Pull the print head rel
the print head up away from
3. Grip the stock firmly from the rear of the Unit
and remove.
Page 29 of 38
71U-1415-100K; REV E
ET6000 Operator’s Manual
