7.11 Simulation tab
Figure 7.49: Contour plot of 336 readings
7.10.3 Minimum .dat requirements
The Contour plot reads records from a .dat file created by retrieving data from the SQM-LU-DL. You can use other
methods to generate the Altitude and Azimuth field and make up a .dat file yourself. The minimum requirements for the
.dat file to be read by the contour plotting function are:
•
One comment line describing the field of UTC Date & Time, Altitude, Azimuth.
•
One line defining the ending of the header.
•
Following lines of data
Here is an example:
# UTC Date & Time, MSAS, Altitude, Azimuth
# END OF HEADER
2018-05-15T06:05:24.057;21.85;0;0
2018-05-15T06:05:34.040;21.86;20;0
7.11 Simulation tab
The “Simulation” tab is enabled from the View menu.
Unihedron SQM-LU-DL Operator’s Manual -
20220119
59
Summary of Contents for SQM-LU-DL
Page 2: ......
Page 17: ...17...
Page 19: ...Figure 4 1 Front and back of of unit Unihedron SQM LU DL Operator s Manual 20220119 19...
