Unihedron SQM-LU-DL, Operator'S Manual

Page: 33 / 101

7.3 Operation
•
Enter a starting time offset value.
•
Press Replot .
•
Alter the offset and replot until there is overlap of the two lines at a date and time that should be overlapping.
•
Record the time offset and use it in the Tools: .dat time correction utility as follows ...
•
press ” Select file ”, then select the problem .dat file.
•
Enter the time difference which you recorded earlier.
•
Press ” Correct .dat file ”.
View : Plotter : Customized colors and line widths The colors and width of plot lines and can be modified in the
udm.ini/cfg file (found in the View:Directories:ConfigFile path). Edit the file with a text editor and place settings under
the Plotter: section, for example: MPSASColor=clRed
The following names can be used to define plot line colors: MPSASColor MPSAS2Color MPSAS3Color MoonColor
SunColor CivilColor NauticalColor AstronmicalColor SunTwilightColor VoltageColor TemperatureColor
Color names or numbers are defined here:
https://wiki.freepascal.org/Colors#Convert_TColor_to.2Ffrom_
string
The width of a line is defined with an integer number of pixels, for example: MPSASWidth=3
The following names can be used to define plot line widths: MPSASWidth MPSAS2Width MPSAS3Width MoonWidth
SunWidth CivilWidth NauticalWidth AstronmicalWidth SunTwilightWidth VoltageWidth TemperatureWidth
Unihedron SQM-LU-DL Operator’s Manual -
20220119
33