Unigraf UCD-240, User Manual

Page: 62 / 78

UCD Console for UCD-340 User Manual | Unigraf Oy
62.
Name=N0,N1,.
..
Name+=Numb
er
Name-
=Number
Name*=Numb
er
Name/=Numbe
r Name[1] with values N0, N1,... and the
variable Name is the list SIZE. Values within
braces can be variables and can be nested: -
var
Test=Skip[bool[1]],Skip[bool[0]].
-loops number of
loops or
Name=Numbe
r
Name=VarNa
me Starts looping. Name can be used as a nested
variable in -c commands. Name starts at zero
when loop starts. (VarName is a variable name.)
-
continue Causes subsequent commands up to the -loops
pairing -endloops to be skipped.
-
endloop
s Ends looping (with respect to preceding -loops
command).
-skip Skip, no operation (can be used with -ontrue).
-exit "text" Exit scripting and print text.
-ontrue If preceding .read with expression was true, run
the next command, else run that following it.
-timeout time
milliseconds
Timeout for options that require them.
-waiton .read=val.exp; Wait on a .read=Value.Expression to become
true or time out
(a device must be open).
-pic file name Capture and save a picture to file (a device must
be open).
-
beginht
ms Begin new html test report (a device must be
open).
-
endhtml End html test report (a html file must be open).
-
wpdosin
k file name Write device sink PDO data to file (a device
must be open).
-
rpdosink file name Read sink PDO data from file to device (must
be open).