UCD Console for UCD-340 User Manual | Unigraf Oy
53.
•
“res_frate” – Number of frames per second, as milli-hertz (60 fps = 60000)
•
“res_bpp” – Number of bits per pixel, as number of bits
•
“col_format” – Indicates the wanted pixel color formatting
•
“col_range” – Indicates dynamic range (VESA/CEA)
•
“col_yc” – Indicates YCbCr coefficients (ITU-601/ITU-709)
•
“exit_proceed” – Value for the application to return as its exit code
Request ID 7
Request for DUT to enter power save mode. Passed parameters include at least the following:
•
“op” – ID for this request (7)
•
“exit_proceed” – Value for the application to return as its exit code
Request ID 8
Request for DUT to exit power save mode. Passed parameters include at least the following:
•
“op” – ID for this request (8)
•
“exit_proceed” – Value for the application to return as its exit code
Request ID 9
Request for DUT to transmit test pattern #1 in given video mode and color depth. Passed
parameters include at least the following:
•
“op” – ID for this request (9).
•
“res_x” – Number of horizontal pixels on the active area.
•
“res_y” – Number of vertical pixels on the active area.
•
“res_frate” – Number of frames per second, as milli-hertz (60 fps = 60000).
•
“res_bpp” – Number of bits per pixel, as number of bits.
•
“exit_proceed” – Value for the application to return as its exit code.
Request ID 10
Request for DUT to transmit video and audio with defined parameters. The following
parameters are included:
•
“op” – ID for this request (10).
•
“res_x” – Number of horizontal pixels on the active area.
•
“res_y” – Number of vertical pixels on the active area.
•
“res_frate” – Number of frames per second, as milli-hertz (60 fps = 60000).
•
“res_bpp” – Number of bits per pixel, as number of bits.
•
“aud_pat” – Indicates the audio pattern to be used.
•
“aud_chn” – Indicates the number of audio channels to be used.
•
“aud_freq” – Indicates the sampling rate to be used.
•
“aud_bits” – Indicates the sample size, in bits, to be used.
•
“aud_alloc” – Indicates the channel allocation bits to be used.
•
“aud_ppr_1” … “aud_ppr_8” – Indicates the pattern periods as count of samples for
each channel to be used. NOTE: These values are present only when the requested
audio pattern is “sawtooth”.
•
“exit_proceed” – Value for the application to return as its exit code.
Reqeust ID 11
Request for operator to check audio test pattern playback and respond with “pass” if audio
playback is correct, and with “fail” if audio playback is not correct. The following parameters
are included:
•
“op” – ID for this request (11)
•
“exit_pass” – Value for the application to return for “pass” response.
•
“exit_fail” – Value for the application to return for “fail” response.
Summary of Contents for UCD-240
Page 1: ......
Page 76: ...UCD Console for UCD 340 User Manual Unigraf Oy 76 ...
