Unigraf UCD-240, User Manual

Page: 49 / 78

UCD Console for UCD-340 User Manual | Unigraf Oy
49.
(...Continued)
Key Value / Description Refere
nce
“op”
The value is a request ID that identifies what is being
requested for the operator to do and/or evaluate.
Currently valid ID’s are listed below.
-
1 Request for DUT to start link training with given
lane count and link speed
1.1.5.1
2 Request for DUT to transmit test pattern #1 in
given video mode
1.1.5.2
3 Request for DUT to read EDID from TE 1.1.5.3
4 Request for DUT to reduce number of lanes being
used
1.1.5.4
5 Request for DUT to increase number of lanes being
used
1.1.5.5
6 Request for DUT to transmit test pattern #1 in
given video and color mode
1.1.5.6
7 Request for DUT to enter power save mode 1.1.5.7
8 Request for DUT to exit power save mode 1.1.5.8
9 Request for DUT to transmit test pattern #1 in
given video mode and color depth
1.1.5.9
10 Request for DUT to transmit video and audio with
defined parameters.
1.1.5.1
0
11 Request for operator to check audio test pattern
playback and respond with “pass” if audio playback
is correct, and with “fail” if audio playback is not
correct. 1.1.5.1
1
12 Request for operator to check video pattern and
respond with “pass” if video playback is correct,
and with “fail” if video playback is not correct.
1.1.5.1
2
13 Request for operator to play the “ping test pattern”
audio stream three times and verify it played
correctly. If the playback is correct, respond with
“pass” or if the playback was not correct, respond
with “fail”
1.1.5.1
3
14 Request for DUT to write FEC_READY bit in
DPCD register 0x120
1.1.5.1
4