Unigraf UCD-240 User Manual Download Page 43 | Manualshive

Page: 43 / 78

background image

UCD Console for UCD-340 User Manual | Unigraf Oy

43.

CRC Based Video Test • Single Frame Video Stability
Test

Test Parameters and Reference Frame

Similar to Electrical Test, test parameters for CRC based video tests are set in UCD
Console GUI. You can use UCD Console GUI to set the test parameters for the automated
tests. Please note that test parameters should be set according to the characteristics of the
DUT and test parameters use in this test set-up might not be suitable for other DUTs. For
detailed instructions on how to set the test parameters, please refer to the CRC based Video
Test Set chapter in Chapter 9. Please, note that UCD Console GUI cannot be operated if
UCD-240 is running scripts on the command-line.

Before running automated CRC based video test, a reference frame must be captured and
the DUT must be set to DP Alt Mode.

You can set the DUT to DP Alt Mode by running the

Set4LanesModeOn or

Set2LanesModeOn

macro. For detailed instructions refer to chapter 4 of this manual.

Detailed information about the macros can be found from the USB Flash Drive delivered
with UCD-240 from the macros text file.

For detailed information on capturing the reference frame, please refer to chapter 9 in this
manual. Please note that the Reference frame should not include any changing items such
as clock or battery level indicator as a change in the reference CRC will result as a failed
test.

«
...
41
42
43
44
45
...
»

Summary of Contents for UCD-240















































































Reviews:

No comments

Related manuals for UCD-240

Brand: Backyard Discovery Pages: 51

Brand: Nautilus Pages: 12

Brand: CAIRE Pages: 16

Brand: Cannon Pages: 40

Brand: NARGESA Pages: 34

Brand: Panlux Pages: 2

Brand: Ocmis Irrigazione Pages: 100

Brand: LAPPSET Pages: 16

RIDA qLine ZG2601

Brand: R-Biopharm Pages: 23

Brand: Wasp Pages: 50

Brand: Jackson Pages: 2

Brand: Vag Pages: 10

Cell Saver Elite+

Brand: Haemonetics Pages: 230

Brand: Ocean Signal Pages: 2

RadioPRO 4 RP4-MZ11

Brand: PAC Pages: 5

Brand: KaVo Pages: 70

Brand: GreenTec Pages: 66

Brand: Slick Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands