UCD Console for UCD-340 User Manual | Unigraf Oy
31.
SINK DUT TESTING TAB
In UCD Console GUI
Sink DUT Testing
tab you can configure and save tests for running
automated tests for USB-C Sink devices. Please refer the TSI Reference in the chapter 7 of
this document to get a full definition of the TSI Test Cases, the parameters and the
reporting.
Availabe ready-made test sets in the Sink DUT testing tab are
• USB-C Electrical Test Set
USB-C Electrical Test Set
To save your test configuration click the
Export
button. You can load previously saved test
configuration by clicking the
Import
button.
For detailed information about setting the test configuration, please refer to page 26 of this
manual.
Test sets available in the USBC Electrical Test Set are
• Up Face Port CC and Vconn Test
• AUX (SBU) Lines Test
• DUT as Power Sink
• DUT as Power Source
Up Face Port CC and Vconn Test
This test verifies operation of CC lines for short-circuit and open-circuit failures, and that
hardware directly related to CC lines is working properly. During the test, TE will operate
as Type-C UFP device.
In the start of the test TE temporarily disconnects the CC lines to simulate a re-plug event.
Summary of Contents for UCD-240
Page 1: ......
Page 76: ...UCD Console for UCD 340 User Manual Unigraf Oy 76 ...
