manualshive.com logo in svg

Unify OpenScape CP200, Administrator Documentation, Page: 95 / 321

Share
Download
Unify OpenScape CP200 Administrator Documentation Download Page 95

administration.fm

A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation

95

   

  

  

Administration

System Settings

3.6.5.1

SNTP is Available, but no Automatic Configuration by DHCP Server

Data required

•

SNTP IP address

: IP address or hostname of the SNTP server.

•

Timezone offset (hours)

: Shift in hours corresponding to UTC.

•

Daylight saving

: Enables or disables daylight saving time in conjunction with 

Auto time 

change

.

Value range: "Yes", "No".

•

Difference (minutes)

: Time difference when daylight saving time is in effect.

•

Auto time change

 / 

Auto DST

: Enables or disables automatic control of daylight saving 

time according to the 

DST zone

.

Value range: "Yes", "No". Default setting is Yes. After a factory reset, the system will be re-
set to this value.

•

Time zone/DST zone

: Area with common start and end date for daylight saving time.

Value range: "Australia 2007 (ACT, South Australia, Tasmania, Victoria)", "Australia 2007 
(New South Wales)", "Australia (Western Australia)", "Australia 2008+ (ACT, New South 
Wales, South Australia, Tasmania, Victoria)", "Brazil", "Canada", "Canada (Newfound-
land)", "Europe (Portugal, United Kingdom)", "Europe (Finland)", "Europe (Rest)", "Mexi-
co", "United States", "New Zealand", "New Zealand (Chatham)".
Default setting for 

US

 is "

United States

". After a factory reset, the system will be reset to 

this value.

Administration via WBM

Date and Time

>

Please note that 

Difference (minutes)

 must be specified both for manual and auto-

matic DST toggling.

SNTP IP address

Timezone offset (hours)

Date and time

Daylight saving

Time source

192.43.244.18

Daylight saving

Difference (minutes)

Auto time change

;

DST zone

Europe (Rest)

Submit

Reset

1

60

Summary of Contents for OpenScape CP200


































































































































































































































































































































Reviews:

No comments