Unify OpenScape CP200 Administrator Documentation Download Page 16

Page: 16 / 321

Overview

A31003-C1000-M101-1-76A9, 03/2016

OpenScape Desk Phone CP200/400/600, Administrator Documentation

uebersicht.fm

The OpenScape Desk Phone CP Family

1.6.3

OpenScape Desk Phone CP200

With the

Handset

, the user can pick up and conduct calls in the usual manner.

The

Microphone

is used in the speakerphone mode.

The

Display

provides intuitive support for telephone operation.

Conversation Keys:

Hold

: Places a call in hold.

Transfer

: Transfers a current call to another party.

Conference

: Initiates a conference call.

With the

Menu Key

, the user has access to the user menu.

With the

Messages Key

, the user has access to the voicemail and the call log.

With the

Navigation Keys

, the user/administrator can navigate through the various phone functions.

With the

Function Keys

, the user can comfortably operate the phone´s functions like Conversations,

Phonebook, Call Deflection and Redial.

The

Keypad

is used for entering phone numbers and text.

Audio Keys:

and

: Increases/decreases the speaker/headset and handset volume.

Mute

: Turns off/on the microphone during conversations.

Speaker

: Turns on/off the hands-free mode (speakerphone).

Headset

: Switches the audio between handset/speakerphone and headset

The

Notification LED

visually signals incoming calls and new voice messages.

Tabelle 1-3

Summary of Contents for OpenScape CP200


































































































































































































































































































































Search results

Summary of Contents for OpenScape CP200

Reviews:

Related manuals for OpenScape CP200

Brands by name

Popular brands

Unify OpenScape CP200, Administrator Documentation

Search results

Summary of Contents for OpenScape CP200

Reviews:

Related manuals for OpenScape CP200

Brands by name

Popular brands