Unify OpenScape CP200, Administrator Documentation

Page: 72 / 321

Administration
A31003-C1000-M101-1-76A9, 03/2016
72
OpenScape Desk Phone CP200/400/600, Administrator Documentation
administration.fm
IP Network Parameters
A Security PIN can be provided which is used for decrypting data provided by the DLS during
bootstrap. For further information, please refer to the DLS documentation.
Data required
•
DLS address
: IP address or hostname of the server on which the Deployment Service is
running.
•
Default mode port
: Port on which the DLS Deployment Service is listening.
Default: 18443.
•
Contact gap
: Minimum time interval in seconds that must elapse between responses to a
ContactMe request from the DLS, in order to prevent DoS attacks.
Default: 300.
•
Revert to default security
: When set, security mode will be set to default. When using
local phone administration, this will be set by selection option ’Default security’ after press-
ing Save&exit.
•
Mode
: Determines whether the communication between the phone and the DLS is secure.
Value range: "Default", "Secure", "Secure PIN". This parameter is read-only.
Default: "Default".
•
Security PIN
: Used for enhanced security.
Administration via WBM
Network > Update Service
Update Service
DLS address
Default mode port
Submit Reset
Mode Default
Contact gap 300
18443
Security PIN
Revert to default security
;