manualshive.com logo in svg

Unify OpenScape CP200, Administrator Documentation, Page: 19 / 321

Share
Download
Unify OpenScape CP200 Administrator Documentation Download Page 19

inbetriebnahme.fm

A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation

19

   

  

  

Startup

Prerequisites

2

Startup

2.1

Prerequisites

The OpenScape Desk Phone CP acts as an endpoint client on an IP telephony network, and 
has the following network requirements:
•

An Ethernet connection to a network with SIP clients and servers.

•

OpenScape Voice server.

•

An FTP Server for file transfer, e. g. firmware, configuration data, application software

•

A DHCP (Dynamic Host Configuration Protocol) server (recommended).

•

DLS (OpenScape Deployment Service) for advanced configuration and software deploy-
ment (recommended). 

For additional information see:

 http://wiki.unify.com/wiki/IEEE_802.1x.

2.2

Assembling and Installing the Phone

2.2.1

Shipment

•

Phone

•

Handset

•

Handset cable

•

Subpackage: 
–

Document "Information and Important Operating Procedures"

–

Emergency number sticker

7

Only use 

switches

 in the LAN to which the OpenScape Desk Phone CP phone 

is connected. An operation at hubs can cause serious malfunctions in the hub 
and in the whole network.

Summary of Contents for OpenScape CP200


































































































































































































































































































































Reviews:

No comments