Unify OpenScape CP200 Administrator Documentation Download Page 70

Page: 70 / 321

Administration

A31003-C1000-M101-1-76A9, 03/2016

OpenScape Desk Phone CP200/400/600, Administrator Documentation

administration.fm

IP Network Parameters

3.4.7.3

Terminal Hostname

The phone’s hostname can be customised.

The corresponding DNS domain is configured in Network > General IP configuration > DNS
domain (see Section 3.4.7.1, “DNS Domain Name”).

The current DNS name of the phone is displayed at the right-hand side of the banner of the
admin and user web pages, under

DNS name

. To see configuration changes, the web page

must be reloaded.

The DNS name can be constructed from pre-defined parameters and free text. Its composition
is defined by the

DNS name construction

parameter

Administration > System > System

Identity > DNS name construction

. The following options are available:

•

None

: No hostname is send to the DHCP server during DHCP configuration.

•

MAC based

: The DNS name is built from the prefix "OIP" followed by the phone’s MAC

address.

•

Web name

: The DNS name is set to the the string entered in

Web name

•

Only number

: The DNS name is set to the

Terminal number

, that is, the phone’s call

number (E.164).

•

Prefix number

: The DNS name is constructed from the the string entered in

Web name

followed by the

Terminal number

Administration via WBM

System > System Identity

DHCP and DNS must be appropriately connected and configured at the customer
site.

It is recommended to inform the user about the DNS name of the phone. The
complete WBM address can be found under

User menu > Network information >

Web address

System Identity

Terminal number

Terminal name

Submit

Reset

3338

Display identity 312

Enabled ID

;

Web name

DNS name construction Only number

Summary of Contents for OpenScape CP200


































































































































































































































































































































Search results

Summary of Contents for OpenScape CP200

Reviews:

Unify OpenScape CP200, Administrator Documentation, Page: 70 / 321

Search results

Summary of Contents for OpenScape CP200

Reviews: