SHB_PNG07.fm
A31003-G2100-S100-2-7620, 03/2014
PNG Configuration for Gigaset M2
plus
and M2 Ex professional, Service Manual
19
PNG Configuration
Alarm Configuration
7.2.1.3
PNEZ Basis (Number Deleted)
PNG-S monitoring can be activated and deactivated without the PNEZ if "PNEZ Basis" is de-
leted.
PNG-S monitoring starts immediately after activation without a function test
(
Add. Features
->
PNG Activation
menu):
●
The automatic alarms configured are immediately activated.
●
The PNG LED indicates that monitoring mode is active (LED flashing).
●
Prealarms and alarms are generated in accordance with the configuration.
●
Alarm calls are routed to the configured alarm destinations.
●
Alarm calls are repeated in accordance with the configuration. The alarming signal can be
manually deactivated following the minimum call count (five alarm calls). "PNG OFF" is dis-
played on the right display key.
Monitoring is deactivated after resetting PNG activation in the
Add. Features
->
PNG Activa-
tion
menu.
The control ports are also deleted when you delete the "PNEZ Basis".
Control calls for controlling the PNG-S are only recognised if the CLIP information for the rele-
vant control port is transmitted in the Setup message.
●
The feature is supported in HiPath Cordless Enterprise with CMI 3.0 CV 320 and later.
●
This feature is supported on HiPath Cordless Office from HiPath 3000 V6.0/SMR-7 and
from HiPath 3000 V5.0/SMR-12.
●
Gigaset base stations cannot guarantee that CLIP information will be transmitted in the
Setup message.
Please note:
if the Cordless Multicell Integration (CMI) system used transmits the CLIP infor-
mation in the requested format, control calls can also be used even though "PNEZ Basis" has
been deleted. In this case the required control port numbers must be configured individually
and manually.
7
This type of operation does not conform to BGR 139.
