SHB_PNG01.fm
A31003-G2100-S100-2-7620, 03/2014
PNG Configuration for Gigaset M2
plus
and M2 Ex professional, Service Manual
4
Introduction
Overview
1
Introduction
Contents
This chapter contains the following sections:
●
●
Section 1.2, “Data Protection and Data Security”
●
Section 1.3, “Typographical Conventions and Symbols Used”
●
Section 1.4, “Reference Manuals”
1.1
Overview
The Gigaset M2
plus
professional and Gigaset M2 Ex professional handsets can be used as
personal alarm signal devices with a voice communication facility (PNG-S).
The handsets offer a range of features to support automatic or deliberate alarm signalling.
The PNG-S monitors the person and signals an alarm when alarm conditions are identified.
The following types of alarms and signals are available:
●
Man Down Alarm, Non Movement, Escape Alarm:
The integrated motion sensor technology recognises motionlessness, detects deviation
from an upright position and sudden movement.
●
Pull Cord Alarm:
The system recognises when a magnetic contact, which is plugged in on the underside of
the handset and which can be attached to a person via a cord, is detached.
●
Time Alarm:
The user’s ability to respond can be checked through regular operation of the handset. The
user is requested to make an entry at regular intervals.
●
Deliberate alarm:
Users can trigger an alarm by activating the emergency key.
●
Signal in the event of a technical fault:
The handset identifies local technical faults and signals them to the user. Example: the
handset is not receiving any signals or the battery charge is too low. The user can then take
action to rectify the fault.
