SHB_PNG07.fm
A31003-G2100-S100-2-7620, 03/2014
PNG Configuration for Gigaset M2
plus
and M2 Ex professional, Service Manual
41
PNG Configuration
Factory Defaults
7.5
Factory Defaults
You should always reset the factory defaults before re-programming a handset because the ex-
factory configuration conforms to BGR.
You can then configure the settings you require.
The following table contains the factory defaults:
Parameter
Active
General Settings:
Alarm Number Basis
(Blank)
PNEZ Basis
(Blank)
Alarm Call Count
15
Repeat Alarm Time
4 s
Autom. alarms OFF
No
Signal Off - manual
On
Signal Off - autom.
On
Transport Time
2 s
Emergency:
Alarm Signal
On
Alarm destination
<Alarm Number Basis>
Alarm destination lp
<Alarm Number Basis>
Non Movement:
Activation
On
Response time
90 s
Prealarm time
15 s
Alarm Signal
On
Alarm destination
<Alarm Number Basis>
Man Down Alarm:
Activation
On
Response time
90 s
Prealarm time
15 s
Alarm Signal
On
Table 7-22
Factory defaults
