![background image](http://html1.mh-extra.com/html/unifone/home-office/home-office_installation-and-programming-manual_842134027.webp)
S e c t i o n 3 – S y s t e m P r o g r a m m i n g
23
System Programming Code Summary
The prefix *9 is used to program a feature, *8 is used to activate it.
The default PIN code is 7373.
System programming can only be carried out at master extension, this is ext. 12 on 206 and ext.
13 on 208/212.
Feature
Programming Codes
Action
*9 PIN 881 ac_no, ac_pin #
Assign a PIN number to an account
206:
01-24
208/212:
01-40
*9 PIN 882 ac_no, class #
Assign a call barring class to an account
*9 PIN 883 1 ext. #
Switch on account code operation for an extension
Account Code
Operation
(p 29)
*9 PIN 883 0 ext. #
Switch off account code operation for an extension
*9 PIN 2 carrier 0 acc.code #
Program carrier access code (9 digits max)
*9 PIN 2 carrier 0 #
Clear access code for carrier
*9 PIN 215 carrier auth_code #
Program optional authorisation code (10 digits max)
*9 PIN 215 carrier #
Clear authorisation code
*9 PIN 202 tab_ent prefix #
Program 4 digit exempt table number
*9 PIN 202 tab_ent #
Clear the exempt number (tab_ent = 00 to 39)
*9 PIN 205 start end #
Program peak time zone
*9 PIN 205 #
Clear time zone
*9 PIN 206 pause #
Program pause, 0 – 9 secs
*9 PIN 203 day charge_period
carrier #
Program alternative carrier for set time
*9 PIN 208 line entry no #
208/212 only:
Add number to route on exchange
line (5 digits max)
*9 PIN 200 #
Switch off alternative carrier feature
*9 PIN 201 #
Switch on ACS using carrier prefixes by time of day
Alternative
Carrier
Selection
(p 30)
*9 PIN 202 #
208/212 only:
Switch on ACS using separate lines
by number dialled
*9 PIN 242 #
Record answer message 1 (fax/voice card option)
*9 PIN 243 #
Record answer message 2 (fax/voice card option)
*8 430 #
Switch off incoming call control all exch. Lines
*8 43 N A #
Switch on incoming call control exch. line N
*8 440 #
Switch off remote paging all exch. Lines
*8 44 N A #
Switch on remote paging exch. line N
*8 460 #
Switch off DISA for all exch. lines
*8 46 N A #
Switch on DISA for exch. Line N
*9 PIN 840 number #
Program DISA emergency number
*8 470 #
Switch off remote programming for all exch. Lines
*8 47 N A #
Switch on remote programming for exch. line N
*9 PIN 461 ACCESS CODE #
Program DISA Access Code
*9 PIN 471 ACCESS CODE #
Program Remote programming Access Code
*9 PIN 441 ACCESS CODE #
Program Remote paging Access Code
*9 PIN 4X0# 4X0#
Delete access code X= 4, 6 or 7
*8 48 line, delay #
Program delay before Courtesy service
*8 401 #
Switch on automatic answering
Automatic
Answering
(p 31)
*8 400 #
Switch off automatic answering
*8 531 #
Enable boss – secretary operation
Boss Secretary
(p 37)
*8 530 #
Disable boss – secretary operation