S e c t i o n 3 – S y s t e m P r o g r a m m i n g
29
Account Code Operation
Account code operation allows calls to be barred and logged depending on the user, not the
extension. An extension may be switched to 'account code mode', it will then require each user to
input the sequence: ** then 'account-pin' before making the external call in the normal manner. Up
to 24 accounts may be set up on the 206 system, and 40 on 208/212 system.
Call detail logging will record the external call details with the user account number as well as the
extension number if the extension has account code operation enabled. See Call Detail Recording
(CDR) on page 40 for the format used.
Each extension may be separately configured to work with account code operation or work in the
standard manner. Only one PIN code may be assigned to each user account.
Extensions which have account code operation set up but no valid account pin is entered will be
assigned call barring class 4. This means incoming calls will be accepted but only emergency numbers
and numbers found in the exempt table may be dialled. In order to dial other numbers the user must
dial the account PIN code before the telephone number. System speed dial numbers are exempt
from call bar checking after the account pin has been entered.
Default
No extensions use call accounting and no accounts are set up.
Assign a PIN number to an account
SYSTEM SETTINGS
Account Access
Assign PIN to Account
Assign a call barring class to an account
SYSTEM SETTINGS
Account Access
Assign Class to Account
Switch on account code operation for an extension
SYSTEM SETTINGS
Account Access
Assign Extension
Switch off account code operation for an extension
SYSTEM SETTINGS
Account Access
Remove Extension
Key
ac_no =01 – 24 for account
number
(206)
01 – 40 for account
number
(208/212)
ac_pin =
pin number for the
account, 4 digits
class =
0 for no COS checking
1 – 5 for call barring
class of service 1 to 5
PIN
ac_no, ac_pin
PIN
ac_no, class
PIN
ext.
PIN
ext.
