![background image](http://html1.mh-extra.com/html/unifone/home-office/home-office_installation-and-programming-manual_842134046.webp)
I n s t a l l a t i o n & P r o g r a m m i n g M a n u a l
42
Call track ID number
On any external call, a user may enter a 3-digit tracking ID number that will be recorded in the CDR
output. This is useful for businesses that need to keep a track of the time and cost of all calls to each
client. Users enter R## CustomerID # during a call to assign a client ID to the call.
Note: If the call was made using a 2-digit account code it will be overwritten by the 3-digit Call track
ID number.
Default
Call detail recording to printer is disabled. The system is in PC mode. No extensions have hotel call
logging enabled. Calls are logged only at call end.
Switch CDR output to serial printer format (ASCII CDR information only)
GENERAL SETTINGS
CDR
On
Switch CDR output to PC program format
(ASCII CDR information plus binary PC program information)
GENERAL SETTINGS
CDR
Off
Enable hotel call logging for an extension
Disable hotel call logging for an extension
(remember to clear the extension’s call log with code below)
Send call details for hotel logging enabled extension to printer
Mask last 4 digits of telephone number in CDR record
Show full telephone number in CDR record
Log only hotel logging enabled extensions in CDR output, not standard extension call
information
Log both standard extension calls at end of call and hotel logging enabled extensions
Log call end only
Log call ring start and ring end only
Log call ring start, ring end and call end
Call Waiting Tone
A tone will sound on calls in progress to warn of another incoming call. The call waiting tone is the
same as the Telstra call waiting cadence. It may be disabled for the telephone system with a master
code.
Setting an extension as data-protected will disable the call waiting tone on an extension by
extension basis.
Default
The call waiting tone is enabled.
Disable call waiting tone
GENERAL SETTINGS
Call warning tone
Off
Enable call waiting tone
GENERAL SETTINGS
Call warning tone
On
Clock Setting
The system employs a real-time clock that is backed up for at least 6 hours in case of power failures.
This time is displayed on the Executive Terminal and affects Alarm Calls, Call Detail Recording,
Alarm Loop Control, and Automatic Day/Night Mode.
Systems with an ISDN option will automatically set the time at the start of each day when an
ISDN call has been connected.
ext
ext
ext