![background image](http://html1.mh-extra.com/html/unifone/home-office/home-office_installation-and-programming-manual_842134035.webp)
S e c t i o n 3 – S y s t e m P r o g r a m m i n g
31
Program Carrier access code
LCR SETTINGS Carrier access codes
Clear access code for the carrier
Program optional Carrier Authorisation code.
LCR SETTINGS LCR pin code
Clear Authorisation code for the carrier
Program optional pause duration of 0 to 9 seconds
LCR SETTINGS Set pause period
Switch on ‘Carrier select by time of day’ ACS feature (Method 1)
LCR SETTINGS LCR On/Off On
Switch off ACS feature
LCR SETTINGS LCR On/Off Off
Advanced Programming For Alternative Carriers
Note: the day of the week is set automatically by the system whenever the date is programmed. See
Clock Setting on page 42.
Programme the peak time zone
LCR SETTINGS Set peak time zone
Clear the peak time zone
LCR SETTINGS Clear peak time zone
Programme ACS by time and by day
LCR SETTINGS Carrier selection
Switch on ACS for a particular carrier all day every day
LCR SETTINGS Carrier selection
Programme table of 40 exempt numbers
LCR SETTINGS LCR exempt numbers
Numbers beginning with these 4 digits are not to be re-routed and will be dialled without using an
alternative carrier.
Clear an ACS exempt table entry
Method 2 – Line selection based on dialled number
This method, available on 208/212 system only, selects a line depending on the number dialled, it
does not take into account the time of the call. It could be used, for example, to route mobile
telephone calls through a GSM gateway connected to an exchange line port.
Each exchange line has a table of 4 numbers of up to 5 digits. If an extension dials a number
matching an entry for any line then the current line will be dropped and the number dialled out on
the new line.
If the matching line is busy or no mach is found the number will be dialled out on the current
line.
If the dialled number matches more than one line then it will be dialled out on the first free
matching line.
Add a prefix to route on exchange line
Switch on ‘Line select by dialled number’ ACS feature
(Method 2)
Switch off ACS feature
LCR SETTINGS LCR On/Off Off
Automatic Answering
Automatic answering provides a powerful and simple way of giving callers access to extensions,
external numbers, remote programming and the public address port without any user intervention.
PIN
carrier
accesscode
Key
carrier =
1 - 4 for alternative
carrier
0 = no alternative carrier
accesscode =
carrier access number
(9 digits max)
authcode =
optional carrier
authorization code (10
digits max)
pause =
0 – 9 for pause of 0 – 9
secs
start =
00 – 23 for time of day in
hours to begin peak time
end =
00 – 23 for time of day in
hours to end peak time
day =
1 – 7 for Sunday to
Saturday
8 for every day.
charge_period=
0 for off peak
1 for peak
2 for all day
table_entry =
00 – 39 for table position
exempt_prefix =
number to ignore for
carriers (4 digits max)
PIN
carrier
PIN
carrier, authcode
PIN
carrier
PIN
pause
PIN
PIN
PIN
start, end
PIN
PIN
day, charge_period, carrier
PIN
carrier
PIN
table_entry, exempt_prefix
PIN
table_entry
208/212 only!
Key
line =
1 - 6 for line 1 - 6
table_entry =
1 – 4 for prefix table
entry
prefix =
number to route on line
(5 digits max)
PIN
line, table_entry, prefix
PIN
PIN