![background image](http://html1.mh-extra.com/html/unifone/home-office/home-office_installation-and-programming-manual_842134011.webp)
S e c t i o n 2 – U s i n g a n E x t e n s i o n
7
Access Code Dialled
Service Feature Description
50
206 only
: Last number Redial
500
208/212 only: Last Number Redial
511-559
206 only:
System Speed Dial Call
501-599
208/212 only:
System Speed Dial Call
70-79
Dial extension speed dial numbers
80
Make a general extension group call
81
Extension group 1 call with 1 ring
82
Extension group 2 call with 2 rings
83
Extension group 3 call with 3 rings
84
Outgoing Call with flash transparency
85
Pick up parked call
86
Pick up any call
88
Outgoing Call with Data Protection
89 Camp
off
91 – 96
(or 01 – 06)
Outgoing Call via Exchange Line
(* For systems using 9 for a line)
#0
Cancel Exchange Line Call-back When Free
#5
Cancel Internal Call Call-back When Free
**account_PIN
Code to enter before dialling out if account codes are active
* 719 #
Operate door 1 latch relay
* 729 #
208/212 option only:
Operate door 2 latch relay
* 619 #
Operate door 1 latch relay for 1 second
* 21 ext. #
Set All Call Diversion From Own Extension
* 21 sys-speed-dial #
Set All Call Diversion to external system speed dial number
* 2 N ext. #
Set Divert No Answer After delay N = 2 – 9 for 5, 10, … 45 sec.
# 21 ext. #
Cancel All Call Diversion from another extension
# 21 #
Cancel All Call Diversion from own extension
# 20 #
Cancel all diversions
*31 ext. #
Set Diversion On Busy
#30 #
Cancel Diversion On Busy
#30 ext. #'
Cancel Diversion On Busy from another extension
*7411#
Toggle Do not disturb
*1
Read message on Executive Terminal (optional)
*6 …
Extension feature programming code
*7 …
Extension feature programming code
*8 …
System feature programming code
*9 …
System feature programming code
Feature Codes available after Recall (R) or Transfer key
Access Code Dialled
Service Feature Description
R0
(or 9
Outgoing Exchange Line Call
(* For systems using 9 for a line)
R ext.
Enquiry call to an extension (hang up to transfer)
R19
Open relay contact of connected door phone
R## Call_track_ID #
Log a call to CDR with a call tracking ID
R** account_PIN
Code to enter before dialling out if account codes are active
R* ext.
Make a brokerage call to an extension
R*0
(or R*9)
Make a brokerage call to exchange line
(* For systems using 9 for a line)
R*9 exch. line
(or R*0 exch. line)
Make brokerage call to specific exchange line
(* For systems using 9 for a line)
R3 ext.
Initiate conference call with extension
R30
(or R39)
Initiate conference call with free exchange line
(* For systems using 9 for a line)
R39 exch. line
(or R30 exch. line)
Initiate conference call with specific exchange line
(* For systems using 9 for a line)