I n s t a l l a t i o n & P r o g r a m m i n g M a n u a l
20
Special Programming Mode
There is also a special programming mode that allows the installer to omit '*9' PIN prefixes when
programming feature codes. To enter this mode the above code at the master extension. You will
hear confirmation tone followed by an interrupted dial tone. If you are using an Executive Terminal
then the extension light will remain on, indicating that the extension is busy. An extended menu of all
the relevant system programming codes will then be accessible.
During this special programming mode outgoing calls cannot be made from the master extension.
Incoming calls will be accepted, although the extension will then no longer be in programming mode
when an incoming call is answered. The programming mode is be exited using one of the following
methods:
Entering the code 9990# at master extension (ext. 12 on 206, ext. 13 on 208/212)
Answering a normal incoming call at master extension.
Leaving the master extension idle for five minutes will automatically exit the system
programming mode.
Enter Special Programming Mode
Exit Special Programming Mode
Executive Terminal Programming Menus
To access programming menus at the master extension using the Executive Terminal press the key
labelled menu and scroll through the menus using the keys labelled ‘<’ and ‘>’.
The main menu and sub menus are:
EXTENSION SETTINGS
SYSTEM INFORMATION
GENERAL SETTINGS (master extension only)
ISDN SETTINGS (master extension only)
TERMINAL FEATURES
SPEED DIAL NUMBERS
CLI MENUS
The menu items ‘GENERAL SETTINGS’ and ‘ISDN SETTINGS’ contains several low-security
system programming options. In order to access some of the PIN restricted programming options it
is necessary to enter the special programming mode by entering *9 PIN 9991# (see above). This
gives access to the following two menus:
SYSTEM SETTINGS
LCR SETTINGS
From these menus the remainder of the higher security programming items is available. After
programming has finished the special programming mode may be exited in the usual way by entering
9990#.
The following pages show the full menu options available from an Executive Terminal.
PIN
