Uniden XTRAK 80 Series Owner'S Manual Download Page 42

Page: 42 / 52

Operation - Special Features

UNIDEN XTRAK

UHF CB Transceiver

Alarm Mode (AL)

When a received code matches to your receiver Selcall ID the XTRAK will respond

based on the Call Alarm mode.

Call Alarm - Auto mode (Default)

a) Transmit an Acknowledge tone to the Caller.

b) Emit CALL Alarm for 10 seconds only.

c) Resume Quiet condition automatically after 20 seconds if the call is not answered.

d) The Unit will start decoding again when the 20 second period elapsed and the call

remained unanswered.

Call Alarm - Continue mode

a) Transmit an Acknowledge Tone to the Caller.

b) Initially an alarm of four successive beeps is emitted for 20 seconds and then two

successive beeps every four seconds continuously unless answered.

c) The Quiet Condition is never resumed.

d) The Unit continues to check if incoming codes have your Receiver Selcall ID

even though the Quiet Condition is already opened. When detected, it will send an

acknowledge Tone to the caller and then resets the Call Alarm.

NOTE

For both of the above mentioned modes, transmission by using the PTT

button is possible when the

TSQ

icon is flashing.

1. Open the Selcall Settings Menu and press

[TRI /S]

[SQL /S]

to select the Alarm

mode setting - which is indicated on the display as AL.
2. Press

[SCAN]

to edit the setting. The current setting flashes.

3. Press

[UP / DOWN]

to select the desired Alarm mode from AUTO or CONT.

4. Press

[SCAN]

to save and exit the setting.

5. Pressand hold

[TRI /S]

to save and exit programming mode. A long confirmation tone

sounds.
OR
Press and hold

[POWER]

to power off to exit programming mode.

XTRAK 80 OM_First Lot_print_r5.indd 42

4/06/2021 1:30:51 PM

Summary of Contents for XTRAK 80 Series





















































Search results

Summary of Contents for XTRAK 80 Series

Reviews:

Brands by name

Popular brands

Uniden XTRAK 80 Series, Owner'S Manual

Search results

Summary of Contents for XTRAK 80 Series

Reviews:

Brands by name

Popular brands