manualshive.com logo in svg

Uniden XTRAK 80 Series, Owner'S Manual

Share
Download
Uniden XTRAK 80 Series Owner'S Manual Download Page 27

Operation

27

UNIDEN XTRAK

UHF CB Transceiver

Key Beep On/Off

1. Press 

[MENU]

 and then use 

[UP / DOWN] 

to highlight 

11 Key Beep

.

2. Press 

[MENU] 

to select.

3. Press 

[UP / DOWN] 

to select between Off, Low, Mid or High.

4. Press and hold 

[MENU]

 to save & exit from the menu mode.

NOTE

If a button is not pressed within 10 seconds the UHF CB Radio will 

automatically exit the Menu Mode.

Alpha Tag

The SELCALL IDs and Extra Receive Channels have the option of displaying a name 

(Alpha Tag) instead of the ID or frequency. Set Alpha Tag to ON to display the name if it 

has been programmed.

1. Press 

[MENU]

 and then use 

[UP / DOWN] 

to highlight 

12 Alpha Tag

.

2. Press 

[MENU] 

to select.

3. Press 

[UP / DOWN] 

to select a On or Off.

4. Press and hold 

[MENU]

 to save & exit from the menu mode.

NOTE

If a button is not pressed within 10 seconds the UHF CB Radio will 

automatically exit the Menu Mode.

XTRAK 80 OM_First Lot_print_r5.indd   27

XTRAK 80 OM_First Lot_print_r5.indd   27

4/06/2021   1:30:51 PM

4/06/2021   1:30:51 PM

Summary of Contents for XTRAK 80 Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands