manualshive.com logo in svg

Uniden XTRAK 80 Series, Owner'S Manual

Share
Download
Uniden XTRAK 80 Series Owner'S Manual Download Page 36

36

UNIDEN XTRAK

UHF CB Transceiver

Operation - Special Features

TSQ (Tone Squelch Mode - Receiver Quiet)

Puts the receiver in the QUIET mode (also known as the Tone Squelch (TSQ) mode) 

for the selected channel. When activated, the transceiver prevents any unwanted 

conversations in the channel from being heard unless the call is specifically directed to 

you and the Selcall ID required to open the QUIET condition has been received.

NOTE

Under this condition, 

PTT

 is temporarily disabled. If you wish to use the 

same Channel for normal communication, simply remove the channel 

from QUIET mode.

Activate/Deactivate Tone Squelch (TSQ) on a Channel

1. Use 

[UP / DOWN] 

to select the channel you want to put in or take out of ‘QUIET’  

 mode.
2. Press 

[TSQ]

. A beep will sound and the 

T.Sq

 icon appears on or disappears from  

  the display.

XTRAK 80 OM_First Lot_print_r5.indd   36

XTRAK 80 OM_First Lot_print_r5.indd   36

4/06/2021   1:30:51 PM

4/06/2021   1:30:51 PM

Summary of Contents for XTRAK 80 Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands