manualshive.com logo in svg

Uniden XTRAK 80 Series, Owner'S Manual

Share
Download
Uniden XTRAK 80 Series Owner'S Manual Download Page 30

Operation - Special Features

30

UNIDEN XTRAK

UHF CB Transceiver

Instant Replay / Receiver Record

The Instant Replay feature automatically records up to 6 minutes of received signals 

which can be instantly replayed (through the speaker) by pressing 

[REPLAY]

.

Instant Replay automatically records receive signals in the normal channel mode and 

SCAN mode.
Press 

[REPLAY] 

at anytime to;

1. Playback the most recent received signal.

 OR

2. Playback the most recent recorded signal in the replay buffer (if Instant Replay  

  automatic receive record was turned Off, see Turning Instant Replay On/Off below). 
During playback the display shows REPLAY and the number of the currently playing 

recording.

After the most recent received signal has been played back, a long confirmation tone 

sounds and the radio returns to the previous mode.  
During playback older recordings can be accessed by pressing 

/

to skip forward/back 

between recordings stored within the buffer. The record number indicates which discrete 

recording is currently being replayed. 

NOTE

• Received signals shorter than 500ms are not recorded.
• Automatic recording of receive signal(s) is temporarily suspended  

  during Instant Replay playback.
• Older recordings are automatically overwritten when new recordings  

  are stored.
• Most received communications are short and the record buffer may  

  contain several recordings.

• Instant Replay does not record when in monitor mode (Sq0 setting in 

  normal channel mode).
• Transmissions (TX) are not recorded. 

Turning Instant Replay On/Off

Instant Replay is ON by default. The R|> icon displays to indicate Instant Replay 

automatic record is On. R|X icon displays when Instant Replay is Off.

1. Press 

[MENU]

 and then use 

[UP / DOWN] 

to highlight 

15 Replay(RX Rec.)

.

2. Press 

[MENU] 

to select.

3. Press 

[UP / DOWN] 

to select an option.

4. Press and hold 

[MENU]

 to save & exit from the menu mode. 

XTRAK 80 OM_First Lot_print_r5.indd   30

XTRAK 80 OM_First Lot_print_r5.indd   30

4/06/2021   1:30:51 PM

4/06/2021   1:30:51 PM

Summary of Contents for XTRAK 80 Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands