Uniden XTRAK 80 Series Owner'S Manual Download Page 14

Page: 14 / 52

Operation

UNIDEN XTRAK

UHF CB Transceiver

Selecting a Channel

Press

[UP / DOWN]

to select a desired channel.

When the

icon is showing the 80 UHF-CB and any user programmed RX channels

will be available for selection or scanning.

The 80 UHF-CB channels are numbered 01-80.

The user programmable RX only channels are numbered 81-180 and only show in the

DCS/CTCSS code area, when programmed¹.

NOTE

¹ Available frequencies & channels are within 400-520MHz Band only

in 12.5kHz steps.
For your reference a list of the available channels, corresponding

frequencies and guidelines for their use is printed on p.47 - p.49. For

Australia, Channels 05 and 35 are reserved for Emergency Calls.

Transmitting & Receiving UHF CB

The XTRAK transmits only on UHF-CB Channels.

NOTE

For your reference a list of the available channels, corresponding

frequencies and guidelines for their use and selection is printed on p.47

- p.49. For Australia, Channels 05 and 35 are reserved for Emergency

Calls.

1. Select a desired channel.

Listen to the channel to make sure there is no activity.

2. Hold the microphone approx. 7cm from your mouth.
3. Press the microphone’s

[PTT]

button and speak in a normal volume across (not into)

the microphone.
The

icon and current

MIC GAIN

level displays while the PTT is pressed.

4. Release the

[PTT]

button to end the transmission and listen for a reply.

For extended range:

- Transmit in Duplex mode, see Using UHF CB Repeater Channels page 15.

For uninterrupted transmission in busy channel areas:

- Transmit & Receive in Master Scan mode, see Master Scan page 24.

XTRAK 80 OM_First Lot_print_r5.indd 14

4/06/2021 1:30:50 PM

Summary of Contents for XTRAK 80 Series





















































Search results

Summary of Contents for XTRAK 80 Series

Reviews:

Brands by name

Popular brands

Uniden XTRAK 80 Series, Owner'S Manual

Search results

Summary of Contents for XTRAK 80 Series

Reviews:

Brands by name

Popular brands