manualshive.com logo in svg

Uniden XTRAK 80 Series, Owner'S Manual

Share
Download
Uniden XTRAK 80 Series Owner'S Manual Download Page 28

Speaker Select

Use this to set which speaker/s to enable.

   

Base Only

   

Remote Only 

   

Dual Speaker

1. Press 

[MENU]

 and then use 

[UP / DOWN] 

to highlight 

13 Speaker Select

.

2. Press 

[MENU] 

to select.

3. Press 

[UP / DOWN] 

to select an option.

4. Press and hold 

[MENU]

 to save & exit from the menu mode. 

NOTE

When an optional External Speaker is connected to the Ext.Sp. jack of 

the base, it substitutes for the Base speaker, which becomes muted. 

NOTE

If a button is not pressed within 10 seconds the UHF CB Radio will 

automatically exit the Menu Mode.

Key Backlight / Display Dimmer

1. Press 

[MENU]

, then use 

[UP / DOWN] 

to highlight 

14 B.Light/Dimmer

.

2. Press 

[MENU] 

to select.

3. Press 

[UP / DOWN] 

to select between Off, Low, Mid or High.

4. Press and hold 

[MENU]

 to save & exit from the menu mode.

NOTE

If a button is not pressed within 10 seconds the UHF CB Radio will 

automatically exit the Menu Mode.

Operation

28

UNIDEN XTRAK

UHF CB Transceiver

XTRAK 80 OM_First Lot_print_r5.indd   28

XTRAK 80 OM_First Lot_print_r5.indd   28

4/06/2021   1:30:51 PM

4/06/2021   1:30:51 PM

Summary of Contents for XTRAK 80 Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands