manualshive.com logo in svg

Uniden XTRAK 80 Series, Owner'S Manual

Share
Download
Uniden XTRAK 80 Series Owner'S Manual Download Page 32

Operation - Special Features

4. Press 

[REPLAY]

 to move to Alpha Tag selection. A cursor flashes in the 1st alpha

  position. If you do not wish to name the channel then move on to step 5.
 i).  Press 

[UP / DOWN]

 to select the desired alpha character.

 ii).  Use 

[TRI /S]

 or 

[SQL /S]

 to shift between cursor positions. 

5. When finished, press 

[REPLAY]

. The RX channel flashes.

  If you wish to select another RX channel to edit, use 

[UP / DOWN]

.

6. Press and hold 

[MENU]

 to exit programming mode. 

A long confirmation tone sounds to indicate the new channel is programmed.

NOTE

To delete an extra RX channel, edit the channel frequency to 000.0000

and exit programming mode.

NOTE

Managing the 100 RX only channels can also be done within the XTRAK 

App (XTRAK 80 PRO only).

32

UNIDEN XTRAK

UHF CB Transceiver

XTRAK 80 OM_First Lot_print_r5.indd   32

XTRAK 80 OM_First Lot_print_r5.indd   32

4/06/2021   1:30:51 PM

4/06/2021   1:30:51 PM

Summary of Contents for XTRAK 80 Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands