Uniden TRAX436, Owner'S Manual

Page: 85 / 132

Page 85
How Do I Use It?
Arrival
(Estimated
Arrival)
Shows the estimated arrival
time at the final destination of
the route based on information
available for the remaining
segments of the route. The
calculation cannot take into
account traffic jams and other
possible delays.
Tap this field to
change the content
of all data fields to via
point information.
Distance Left Shows the distance you need
to travel on the route before
reaching your final destination.
Tap this field to
change the content
of all data fields to via
point information.
Time Left Shows the time needed to reach
the final destination of the route
based on information available
for the remaining segments of
the route. The calculation cannot
take into account traffic jams
and other possible delays.
Tap this field to
change the content
of all data fields to via
point information.
Method This field shows how the
route was calculated. It either
displays the Route Calculation
Method or the Vehicle field from
the Route Planning options. If
you have chosen Car, Taxi or
Bus, the type of the route (Fast,
Short, Easy or Economical) will
be displayed here; if you have
selected Emergency, Bicycle or
Pedestrian, this information will
be displayed here.
Tap this field to
change the content
of all data fields to via
point information.
Warning
icons
In these square fields graphical
symbol are displayed in case
warnings are attached to the
planned route. These are
warnings, so icons always
show information for the whole
route, even if the data fields
display values from your current
position to a via point only.
Tap any of the icons
for an explanation.