Uniden TRAX436, Owner'S Manual

Page: 49 / 132

Page 49
How Do I Use It?
3. Get to the list of results:
• After entering a couple of characters, the names that
match the string appear in a list.
• Tap to open the list of results before it
appears automatically.
4. Pick the street from the list.
6. Enter the house number:
1. Tap .
2. Enter the house number on the keyboard.
3. Tap to finish entering the address.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Entering an address if house numbering is
restarted
There are long roads where the house numbering is restarted at some
point. This way the same house number can appear twice or even
more times on the same road. If this is the case, after giving the house
number, you need to select the appropriate address by the district/suburb
information.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons: (Simple mode), or
, (Advanced mode).
2. By default, TRAX436 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the