7
Installing the Monitor
1. Flip out the stand on the back of the monitor and position the antennas
.
2. Connect the 5V 2A AC adapter to the power input on the rear of the monitor.
Connect the other end of the adapter to a standard indoor power outlet.
#
The monitor comes with a partial charge. Plug it in and let it charge for a full 8 -
9 hours before using it.
3. Press and hold the
POWER
button on the top of the monitor for 3 - 4 seconds to
power it up.
4. The monitor displays the
Uniden
Guardian
screen for a few seconds and
then transitions to the LIVE view if the paired camera has been powered on.
Otherwise
Out of Range
message displays.
#
The screen remains dark until the cameras are powered up.
Installing the Camera
When you are positioning the camera, bring the monitor along; it’s much easier to
get the camera into the right position when you have the display handy.
#
The monitor’s battery will last about 1.5 hours on its own when it is fully
charged.
1. Install the antennas (if needed), position the camera where you want it, plug it
into power, and check video on the monitor. Move the camera if the view is not
what you want.
2. Hold the base of the camera stand where you want to mount it and mark the
location of the screw holes.
3. Use the included screws and anchors to attach the base to the wall or ceiling.
4. Tug gently on the stand to make sure it is securely in place.
5. Connect one end of a
DC 9V 0.6A for
G3700 and
DC 9V 2A
for G3700L AC
adaptor to the camera’s power pigtail and plug the other end into a standard
indoor power outlet.
6. Cameras provided in the kit are already paired to the monitor. Once they are
powered up, the monitor displays images from that camera.
Adjust the camera viewing position, if needed.
