manualshive.com logo in svg

Uniden G37 Series, Owner'S Manual

Share
Download
Uniden G37 Series Owner'S Manual Download Page 28

28

Time Zone 

Time Zone allows you to set the time zone your monitor is in. Your system will know 

that your request refers to the time zone the monitor is in.  [Default = (GMT+10:00) 

Canberra,Guam, Melbourne, Sydney].

1.  Tap   . The 

Time Zone

 screen displays.

2.  Scroll up and down to your camera’s time zone and then tap it. The most 

commonly used time zones for this system are:

 

● GMT+8:00 - Perth

 

● GMT+9.30 - Darwin & Adelaide

 

● GMT+10:00 - Brisbane, Sydney, Canberra & Melbourne (Default)

3.  Tap the next option to turn Daylight Savings Time on or off. 
4.  Tap 

 to return to the previous screen.

Language 

Tap 

 to set the language used on your system. Options are English,

 

Español, 

and Français.

1.  Tap the language you want your system to use.
2.  Tap 

 . The system returns to the previous screen and automatically 

changes over to the requested language; no reboot is necessary.

Summary of Contents for G37 Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands