12
Channel Cycling Modes
There are two ways to cycle between channels - Scan and Auto Sequence.
With Scan mode, the monitor’s screen and speakers are off until a camera detects
motion. That camera then displays at full screen (sound and video on) until there
has been no motion for 15 seconds. After that, the monitor screen turns off again.
Quickly press and release
POWER
to turn Scan mode on and off.
In Auto Sequence mode, each channel displays automatically in sequence in full
screen. Access this mode from Single channel mode. Tap to turn on Auto
Sequence mode;
SEQ
displays. Tap
SEQ
to turn it off and return to Multi-Channel
mode (Dual or Quad).
Dual/Quad channel mode
Quickly press and release
POWER
button.
(Scan mode ON)
Scan mode
Quickly press and release
POWER
button.
(Scan mode OFF)
Dual/Quad channel mode
Single channel mode
Quickly press and release
POWER
button.
(Scan mode ON)
Scan mode
Quickly press and release
POWER
button.
(Scan mode OFF)
Sequence mode
(
SEQ
displays)
Dual/Quad channel mode
Tap
SEQ
.
Tap center of channel screen to
enter single channel mode.
G37XX OPERATION
Your G37xx monitor operates through a series of screens that let you choose
groups of operations. For example, when you tap
SD CARD INDICATOR
in the
pop-up menus, you can view recorded files. Tapping
SETTINGS
in the pop-up menus
let you set up how your system will operate (i.e., camera setup, recording schedule,
motion detection sensitivity, etc.).
Live View Screen
The Live View screen is the monitor’s main screen that displays video from your
camera(s). You can have the system display a single camera or you can set the
screen to display all of them. You can also set the screen to cycle between all live
video feeds. Tap the
icon to change the Live screen video displays.
