Installing Your EXP 901
Selecting the Installation Location
Select a location for the EXP 901 to avoid excessive heat or humidity (as in
a kitchen or bathroom). The Base Unit of your EXP 901 can be placed on a
desk or tabletop near a standard 120 VAC outlet and telephone line jack, or
mounted on a standard AT&T or GTE wall plate. Keep the Base Unit and
Handset away from sources of electrical noise (motors, fluorescent lighting).
Connecting the Telephone Line
There are three types of phone outlets: 1) Modular, 2) 4-prong jack, or
3) hard-wired type.
1) Modular Jack
Plug the telephone line cord from the Base Unit into a standard
modular telephone jack. (Note:
If you do not have a modular jack,
contact your local telephone company for information on the installation
of these jacks.
)
2) 4-Prong Jack
An adapter (not included) is required. The adapter plugs into the
4-prong jack and the telephone line cord plugs into the adapter.
3) Hard-wired Jack
A modular jack converter (not included) is required. You may need to
rewire when connecting the converter (making color-coded connections).
Note:
Your Uniden Cordless Telephone Dealer or a telephone supply
store can advise you on the proper adapter or converter.
The EXP 901 has two telephone line jacks: “LINE IN” and “LINE OUT”.
Note:
You can connect a Telephone Line Cord to either jack.
Caution!
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
6
