Using your EXP 901 Intercom
Note:
The Handset
RING ON/BATT SAVE
switch must be in the
RING ON
position.
The Base Unit
RINGER/VOLUME
switch must be set to either
LO
or
HI
.
Paging from the Base Unit
1.
Press INT’COM. (If no answer, press INT’COM again to disconnect.)
2.
Press TALK or INT’COM on the Handset to answer the page.
Speak into the mouthpiece.
3.
To turn off the Intercom, press INT’COM on the Base Unit.
— OR —
Press TALK or INT’COM on the Handset.
Paging the Base Unit While a Call Holds
1.
Press INT’COM on the Handset. If no answer, press TALK or INT’COM to
disconnect and return to the call ON HOLD.
2.
At the Base Unit, press INT’COM to answer the page.
Speak into the microphone.
3.
To turn off the Intercom, press INT’COM at the Base Unit
— OR —
Press TALK on the Handset. The Handset returns to the call ON HOLD.
Paging from the Handset to the Base Unit
1.
Press INT’COM. on the Handset
(If no answer, press INT’COM again to disconnect.)
2.
At the Base Unit, press INT’COM to answer the page.
Speak into the microphone.
3.
To turn off the Intercom, press INT’COM at the Base Unit
— OR — Press TALK or INT’COM on the Handset.
Using the EXP 901 as a Room Monitor
You may use the EXP 901 Handset to monitor activity near the Base Unit
without anyone present at the Base Unit.
Turn on Room Monitoring
1.
Remove the Handset from the Base Unit.
2.
Press INT’COM on the Handset.
3.
Press TALK on the Handset. You have set up two-way communications
between the Base Unit and the Handset.
Note: Press
VOL/RVOL
on the Handset to adjust the earpiece volume to
loud or soft.
4.
To change to one-way communication (Base to Handset only) for
private listening, press MONITOR on the Handset.
Note:
Press
VOL/RVOL
on the Handset to adjust the Monitor Speaker
volume to loud or soft.
Turn off Monitoring
1.
Press TALK or MONITOR at the Handset.
18
