4. Plug the AC Adapter cord
into the AC Adapter input
jack on the Base Unit.
(Note:
Use only the AC
Adapter supplied with the
EXP 901
.
) Place the cord
inside the molded channel
on the Wall Mount
Adapter connected to the
Base Unit.
5. Place the Base Unit onto
the mounting screws and
slide downward to secure.
Then hang the Handset
on the Base Unit.
6. Plug the other end of the
short Telephone Line
Cord into the telephone
wall jack.
7. Plug the AC Adapter into
a standard 120 VAC
wall outlet.
8. Route the power cord where it will not create a trip hazard, or where it
will not become chafed and create a fire or other electrical hazards.
Attaching
the Belt Clip
1. Insert the tab at the top of the
Belt Clip into the notch on the
back of the Handset.
2. Snap the tabs on the bottom
portion of the Belt Clip into the
two notches (labeled “CLIP”) on
the sides of the Handset.
Use the Belt Clip to attach the Handset to your belt or pocket for convenient
portability. To remove, pry one tab of the lower part of the Belt Clip from the
notch labeled “CLIP,” then push the entire clip upward.
RI
NG
ON
BA
T
T
SA
VE
CL
IP
10
