3.
Press and hold
p
for two seconds to
designate this channel as your new
Priority Channel.
Two beeps indicate that the Priority
Channel is changed.
Tape Recording Channel Communication
You can set any channel for recording while scanning. Then, if your scanner stops on a channel you
have designated for recording, the transmission and its time, as well as the channel number and
frequency, are all recorded.
However, before you can use this feature, you must connect a tape recorder to your scanner. For
information about attaching a recorder to your scanner, see
For use with an optional tape recorder
on page 11.
To program a channel for tape recording:
1.
Use your keypad or Rotary Tuner to
select the channel you want recorded.
2.
Press
x
.
LINE
displays indicating that the channel
will be recorded if you’ve connected a
tape recorder to your scanner.
Repeat these steps to select other channels for recording.
To record a channel, press
s
. When your scanner stops on a channel which displays LINE, the
channel is recorded.
To turn the record feature off for a channel:
1.
Use your keypad or Rotary Tuner to
select the channel you do not want to
record anymore.
2.
Press
x
.
LINE
turns off and the channel will not be
recorded.
SCAN
MANUAL
PRI TRUNK DATA
L/O
DELAY
CTCSS
1
2
4
7
5
8
0
3
6
9
E
27
